Amana NGD7200TW Gas Dryer "damp filter" Questions

...damp dry" setting of perm press cycle? You may not be getting sufficient air flow--remove the lint filter and wash it with detergent and hot water. Also clean excessive lint out of the air vents ...

...damp at end of cycle. Any suggestions of how to fix gratefully received. Check and clean filter/s, if it is vented through a hose, make sure it is not blocked or restricted in any way Please leave ...

The dryer is hot but the cloths are damp after 2 hours in the dryer..its hot but the cloths are still damp? check the air in let and out let pipe are not blocked up with fluff if the dryer cant breath

...damp when the filter wasn't washed out regularly. I found that if i clean and rinsed filter at least once a month making sure that it is left at least over night before putting it back in to the ...

the dampness sensor on the ge profile gas dryer is off - is it possilbe to reset and turn back on? The dampness sensor is just the two curved metal strips (about 5 inches long, and about an inch apart

...filter which if clogged will short cycle the dryer and the clothes will still be damp when done. Also a dirty exhaust pipe (usally 4") will prevent the clothes from drying correctly. Make sure that ...

...damp. Could it be a blocked air filter? Dryer is five year's old however. With possibly above average use. Hi, If your dryer is not drying like it once did or if you just have not taken the time to ...

...damp Easy fix: Look inside the drum below where the filter goes in. You will see two metal strips. They sense the wetness. Now get this: the dryer sheets rub against them and a thin wax buildup on ...

...filter clogged with clothing debris. Clean with cotton buds and a damp cloth till clean. replace all parts and you should have it working once again with a good heat source as well. Every 2-3 months ...

...damp. It actually smells like something is burning. I already checked and redirected the hose, blew the pipe leading outside, cleaned the filter and used a lint brush where the filter goes. What can ...