Kenmore 400 6943 Dryer "gas turns flame" Questions

...turns off and the gas valve drops out and the flame dies. Any ideas? I'm very handy and we have a very good appliance parts store in town. I just need an idea what part to check next. HI thanks for ...

gas flame. Turn on the dryer so the flame is burning. If the flame has a deep blue color and you hear air whistling around the burner, the air/gas mixture is receiving too much air. If the flame has a

...gas cook top. flames burn with yellow top and carbon build up on pot. how to adjust air contence of flame. There has to be a small screw close to where the burners are located and all you need to do ...

...We replace the flame sensor and the flame turns on but the dryer does not stay hot replace the gas valve coils on the top of the gas valve they get weak from the heat and can't keep the gas valve ...

...flame ignites. ohmed out gas valve coil with wires disconnected = OL is it my coil? gas dryer runs. glow ignitor functions normally. flame ignites when i first turn on, but burns out. glow ignitor ...

...turns on and heats when started. runs for 5 five minutes then flame goes out. ignitor glows but no flame. one minute later dryer still running ignitor glows, no flame. this repaets until turned off. ...

gas dryer, it turns on and even ignites, but after about one minute the flame turns off and therefore doesnt dry any clothes??????? ck/replace the 2 black coils on valve they will sometimes fail after

...to see the flame from the burning gas if no flame is present it shuts the gas back off.. So if you have a no heat concern with your dryer it will be either the igniter, gas coil's or the flame ...

gas dryer. Turn on and flame only lasts few mins. Series 80 gas dryer. Turn on and flame only lasts 3-4 mins. Try to turn on again, ignitor glows, but no flame. Wait an hour and try again, flame lasts

gas flame ignites, stays on a minute or two, then cuts off and doesn't reignite unless dryer turned off the gas valve is not sensing flame if you have hsi ignitor it also acts as a flame sensor or you