wont stay lit and I already tried replaceing the gas valve coils. Staying lit is a control issue, consider getting a qualified gas appliance guy to look at it, as home explosion is the next exposure..
...wont turn on when the power button is pushed. but i noticed the heavy duty light on the dial stays on unless I unplug the machine. we have already replaced the control board and had a technician out ...
wont stay lit so can dry Bad gas solenoids which are located at the gas valve inside your dryer. Good luck.
buner wont stay lit What is the model number of the unit?
flame in gas dryer wont stay lit Possibly needs a new thermocouple and a service?
wont stay lit The glow coil comes on, the gas lights, but only stays on for about 15 seconds. it shuts down then comes back on again in about 60 seconds, then the same happens again. I believe that it
wont stay lit I replaced both coils and one temp switch there is no blockage on the exhaust new vent hose and plenty of air flow out the back of the dryer Your flame sensor attached to the side of the
burner wont stay lit . The ignitor glows , fire comes on, but goes out after 5-10 seconds.. The vent in not plugged. Dyer model LD-g612 you need chek blower fan.
...wont stay light, the ignighter is fine. WE NEED TO KNOW WHAT OTHER PART COULD BE THE PROBLEM, THE BURNER LIGHTS UP BUT DOESN'T STAY LIT. THE IGNIGHTER IS WORKING ALSO. What is your model ...
gas dryer will not stay lit check h ere for ideas,, very helpful with diagrams http://www.partselect.com/dryer+dryer-wont-heat+repair.htm
6 questions posted
Usually answered in minutes!
208 Questions
233 Questions
116 Questions
93 Questions
75 Questions