Frigidaire FER641FS Electric Dryer "drum shaft" Questions

...drum shaft? hi ist of all take top off machine ive not done your model have a look if your drum has skrews holding plastic drum together if so take front off machine disconect pipes and wires mark ...

...drum rear shaft Hi, I am looking for an Indesit IS60V dryer drum rear shaft and bearing. This is the circular flange with 3 screw holes and a riveted shaft which then locates in the bearing. The ...

...drum shaft came loose from drum. You can YouTube it for procedure of disassembly of dryer. Remount shaft, if screws are bad may need new shaft with screws, make sure it is tight to drum. While you ...

...the drum from the "pivot" shaft. The pivot shaft is what the drum rides on in the rear. Believe me when I say, fixing a "connected" drum is hard to do. It is very hard to reassemble. Be

is jamming the drum. If everything seems to be ok --- you need to check the pulley on the motor shaft and be sure it is tight on the shaft . More than likely -- it is a broken belt. I hope this helped

...drum shaft, and examine the drum shaft for wear. possible bearing We have made a few videos on these dryers and there are some very good repair guides on these. if you need parts please feel free to ...

drum turns freely with the belt removed. If not, check the rollers. Do not lubricate the rollers or roller shaft, lubrication will attract lint and cause the roller bearings to wear out faster. If the

shaft pull drum up to fit shaft dont put pin in till u have front onlot easyier with help if 1st time but not to bad check bearing pads while you have grey plastic drum carrier off the front hope this

...Drum Shaft and Bearing on my Hotpoint Dryer, Model TS12P. I have ordered the Drum Shaft Kit and would like to replace the OLD items with the NEW. ...

...drum shaft, which would have to be removed, all other dryers no longer use them. Lift dryer drum up slightly and pull it forward a couple inches. (you do not need to remove the belt) Remove all the ...