Samsung DV337 Electric Dryer "drum not turn" Questions

...drum wont turn Replaced old cracked drum with brand new drum, also replaced front rollers that were worn and chewed up from old drum. New drum will not turn. We have checked everything...it turns ...

is not that is the belt a good tight fit on the drum??? is the motor turning? can you turn the drum by hand? if you cant turn the drum by hand its likley to be drum bearings stuck up or sezed up motor

...turn drum, but not heat. Removed back and took drum loose thinking heating element was on the back. Found heating element below drum so replaced drum and checked breaker. Breaker was defective so ...

drum to turn after removing top panel I noticed that belt on my dryer is not running in what appears to be the intended area on the drum because I can see an area of wear on the drum & the belt is

...turn the drum by hand? Is it free turning with just a bit of resistance? If not, the drum may have come off the felt pads or track and is binding up, or the motor is bad and the drive pulley bearings ...

...drum by hand they turn sometimes. The belt has recently been replaced. Woul Amana gas dryer ALG643RAW hard to turn by hand. Also the drum support rollers don't always turn when I am turning ...

...drum will not turn, even manually with the belt removed The dryer drum stopped turning. Prior to this problem we did notice an intermittent knocking sound. The drum will not even turn manually with ...

...Drum does not turn by hand. Only makes a sound when switch is turned on. If it is a sound like a loud hum, the motor is either fried or something is jammed preventing the drum from turning. It could ...

...turn the drum with your hand. It should be a little hard to turn. If it is reall easy to turn the drum then the belt is either off or broke. You can take off the top of the unit, and in the middle of ...

...turn the drum. I read on another sight it could be a thermal fuse and that's why the motor won't move the drum? I need advice on how to procede. Thanks Sounds like this machine needs retirement~! Not ...