Whirlpool GW397LXUS Stainless Steel Gas Range "oven front panel removal" Questions

...oven front that slides into a slot in the metal insulation cover. - (I put on a breathing mask) Folded up the fiberglass insulation from the bottom edge to expose the hidden baking element terminals ...

...front panel, if necessary. Remove other control knobs as needed to remove the panel. The oven setting control is located directly in back of the control knob and is usually held to the control panel ...

...oven at the main breaker. Remove the screws holding the front control panel in place. Some of the screws are located inside the oven and some are on top of the control panel. Tilt the control panel ...

...oven on...the front panel begins to beep with the display reading: "Remove Probe From Oven". However, we have no probe inside the oven. The mind-numbing beeping seems to stop after several minutes. ...

...the front panel 5 scews. pulled the front panel out about an inch and used a pair of long nose pliers to remove the blue wires cliped them together. then just screwed the panel back took about 5

front of the oven. Lift the panel up to disconnect it from the oven. 5. Rotate the control panel sideways to get easy access to the data cable. 6. Remove the screws that hold the data-cable connector.

...oven. Checked the houses fuse box and there is no problem there. I had the same problem. There's a thermostat before the control panel. You need to remove the knobs and the front panel to get to it. ...

...oven base. They all just slide out. 3) Remove door to avoid breaking it. It slides off. 4) Remove old igniters, they are attached with two screws. Remove 2 wires from plugs. It might be necessary to ...

...oven light; completely dark. Have reset the circuit breaker to no avail. The igniters to the gas cook top work fine so at least there is some juice. Is there a simple reset or did we burn something ...

...oven does not heat, the fan works but no heat. The amber panel light on the front doesn't come on either. There is a faulty component inside the unit that is why it is not turning on. The power is ...