Frigidaire FGF328G Gas Range "surface burners" Questions

...surface burners. When a surface burner control knob is turned to the "Lite" position, it provides voltage to the spark electrodes on the gas surface burners. If the surface spark module fails to ...

SURFACE BURNERS IGNITE STILL CLICKS Hello. If the igniters still click, even after you move the dial past the start setting, say to medium or low, begin by checking these: Make sure the electrode (the

...surface indicator light stays on despite the burners being off overnight There is a switch in the burner assembly that senses the burner is hot. It could be the sensor switch is bad. It also could be ...

...burners, including the large burner(of the dual surface--right front), work. Does yours have the (small large burner switch)? If so, try switching it back and forth. It could be defective or your ...

...surface(Glass top) indicator light will NOT go off!? Individual burners, located directly under the cooktop glass, contain a temp sensor which lights up the hot surface lamp when they sense a hot ...

...surface burners work but the oven does not. I checked the oven gas valve and ensured it is on. It still does not work. The upper burners (stove surface burners) work but the oven burners will not ...

surface unit indicator light is always on Even when the burners are off the light is on... I think it could be a fuse issue... but not even sure where to check.. Other then that the unit works perfect

...surface is cool. The rear burners seem to light and maintain the correct hot surface indicators. is this by design or a problem? mvek, If you could see through the glass, you'd see "temperature ...

Range works normally except one of the surface units does not heat. surface light does come on. Might be an open burner or a bad control switch. Check these educational vids out. Top Burner switch ...