Lexmark E260dn Laser Printer "reset page count replace toner" Questions

...website at http://bit.ly/8YJwFU, for the instructions on how to reset the pc page count. You can also contact Lexmark technical support or your authorized service provider for additional

...page count has reset. When you see this light sequence, let go of the X button. 4. Close the front cover. NOTE: If you wish to confirm that the photoconductor page count has reset, print a menu ...

...kit and toner, you will need to reset the printer's page count. Simply press and hold the CANCEL button while the printer is on and the front cover open until all lights are flashing. Hope this

...the lights flash. This indicates that the photoconductor page count has been reset. Release the button and close the front door/cover. For further assistance, please contact Lexmark Technical

...needs to be replaced. Follow the directions that come in the new photoconductor package to install and reset the PC count this is important. Luck did you try a test page to see if it's that way

the page reset procedure has been performed twice, the printer may require service. Check the paper levels, make sure the ink is installed correctly, then power it off and on. See if any of that helps

reset but still having the same issue. Any idea what could be the real problem? And how to fix it? Thanks Gerry You should still be able to do a printer test page (press the arrow button). Look at the

page telling you all the information about the printer, including print count. There is no way to vary how much toner is used through the printer, only by using the software to vary how heavy or light

...Reset PC count" and press Select, the counter will Zero. If this does not work Power up while holding Return button but have the front access cover open Close the cover once "!" displays, you can ...

...Product Date: Not supported Equivalent pages printed: 2161 Average area covered: 10% Clear toner: 1 Page count after replace: 1198 Replaced Toner counts: 0 You will replace the tonner with anothrer ...