Eureka Whirlwind 4388 Bagless Upright Cyclonic Vacuum "vacuum brush turn" Questions

vacuum turns on but the brush is not rotating Most likely a problem with the drive belt or the beater brush. Either the drive belt is broken or the beater brush is frozen due to debris. If you can not

sure the roller brush is free of any debris. Use this link to access your vacuum to change belt or clean the roller brush. http://www.info-vacuum-cleaner.com/hoover-vacuum-cleaners.php Hope this helps

...off. The button is located beside the power button, on the top-front of the vacuum cleaner. Turn on the brush control for cleaning carpet. Turn off the brush control for bare floors or delicate

...vacuum and look at the brush. Can you turn it by hand? If yes, the belt has either broken or slipped off. You could buy a replacement part and fit it yourself if you are handy with a screwdriver or ...

...vacuum and see if you can turn the brush roller by hand,unplug first.if it turns real freely then the belt is broke.if you can't turn it at all then the brush roller is either jammed or the bearings ...

...brush in my dirt devil (royal) vacuum model #130005 plant j does not work when the vacuum is turned on Replace the rubber drive belt to the brush after confirming that the brush is turnign freely. If ...

...brush on the vacuum wont turn and i just got a new belts. It's a hoover with a wind tunnel. (12 amps) how do i fix it? Make sure the vacuum is on the carpet setting..the brush won't turn on the hard ...

...brush connects to. Reattach the brush and try to spin it. If it spins freely, put your vacuum back together, with another belt, and try again. If this doesn't work, I suggest a new/different

...vacuum's rotating brush. This brush should have a black rubber belt wrapped around it, and stretched around the metal shaft of an electrical motor mounted somewhere toward the back of the vacuum. ...