Eureka Whirlwind 4388 Bagless Upright Cyclonic Vacuum "adjust height work" Questions

work If the height adjustment on your Bissell PowerForce Helix Turbo Rewind vacuum is not functioning properly, there are a few things you can try to fix it: Make sure that the height adjustment lever

...height adjustment on it doesn't work? Question edited for clarity. Try and claim on the warranty. It has 5 height adjustments. ...

...adjust brush height for differant carpets. move knob nothing happens Hello! The vacuum does not move up and down when you change the height setting. When the handle is reclined is when the height of ...

...adjust setting In my experience, Hoover height adjustment are "stops" rather than being attached to an axel. Look for something that rould resemble a set of circular steps somewhere in the path the ...

...xl vac doesn't work turn height adjustment knob and height does'nt change sometimes vacs get to old ,, you can find the same model or purchase a new one ...

Height adjustment doesn't adjust work. Vacum Too difficult to push. Height adjustment moves back and forth freely. Won't lock in to an adjustment. Are you Missing the Front Wheels under the Vacuum? ...

...height adjustment not working. Manual says to tilt the vacuum back so the front wheels are off the ground (unit turned off of course) and make the adjustment. May take some back-and-forth force, but ...

height adjustment not adjusting the height adjustment dial turns but the adjusting is`nt happening. turned vacuum over and put pressure on plate while turning dial and the plate is not moving. any ...

height and brush control do not work. Belts are good. Is there a site where I can see a detail of the adjustment hardware? Model U6436-900 Hoover self propelled upright No site available for that, but

...Adjust the height of your brush. First adjust the height of your brush. You will have to take the bottom plate off as you were changing a belt. There are 3 height adjustment settings located at the ...