Radio Shack Cinego D-1000 Multimedia Projector "square image" Questions

I cannot get a square image The image is a perfect square on the bottom right, but the top left it goes off at a very strange angle. I have tired keystone but has no effect. Menu, management, keystone

...image That is caused by a collapsing light pipe. This is a mirrored glass square component that is located directly behind the color wheel. It is comprised of 4 mirrored section approximately 40mm x ...

...square it up? if it looks like a trapezoid, you need to keystone it. you can either use the keystone buttons on the top panel or go into the menu under the image adjustments and select the keystone ...

...IMAGE LARGER A SMALL X IN SIDE A SQUARE (ICON) APPEARS ON THE SCREEN. IT DISAPPEARS IF I REDUCE THE IMAGE SIZE HOWEVER IT REMAINS IF I LEAVE THE IMAGE LARGE. HOW DO I REMOVE THE SMALL ICON? Hi there ...

...Find the keystone correction and make the necessary adjustments this will adjust the image to be

...square the image. its almost like the horizontal keystone is off but no way to adjust it. upper right to upper left is on slight angle going from high (upper right) to low (upper left). Dell has been ...

...ideas? Thank you. i suggest you do not have the projector too far away... 7ft away distance would be a Good  resolution  will also dimm don the square's image  in the

...keystone. You can adjust that up or down until it looks right to you. What it actually does is project an angle image that will look like a square image when it is projected down from your

...image is not square My Pj projects a picture that is tappered on one side. In other words the left edge of my screen is 36" and the right side is 33". This creates a slanted border at the top of the ...

...square instead of an arrow When I use my computer (MAC OS X), the mouse appears as an arrow on my regular monitor, but on the projected image, it appears as a box or tiny page or something. I need it ...