...Auto-Shut Off Option. This May Happen. Try Disable Auto Shut-Off Option. Clean the filters. This unit has two that must be removed and blown out. If the filters are dirty, the unit will shut off due ...
auto shutdown after 2min please help me for resolve this problem. This would seem to be heat-related as these lamps get hot rather quickly. The first quick and dirty solution - try cleaning the filter
Question about ViewSonic Office Equipment & Supplies
I have set the auto shutdown to maximum, however, the projector keeps shutting after 20 minutes. What is causing this? Check to make sure that the auto shutdown is turned off. This should prevent any ...
...auto-shut off was set for 15 minutes. Double check the lamp settings and disable auto-shut off. THIS PROJECTOR IS NOT HAVING AIR FILTER PLEASE LET IN MIND DLP TECHNOLOGY PROJECTORS ARE NOT HAVING AIR ...
About 20 minutes into the movie the Optoma will shut off. When I restart it runs fine for about another 20 minutes and then shuts off again. check if the auto off timer is set to on.
Question about Sharp Office Equipment & Supplies
...by auto shut down mode" but it never turns off and i cant seem to get rid of it! reset the system, read your owner manual or download from www.retrevo.com or www.fitness.manualsonline.com God bless ...
Question about Eiki Office Equipment & Supplies
...auto shut down ? check menu setting if this is set to READY, then it will wait until signal appears again at the input. You can set this better to "shut down", PJ will go to standby after cooling ...
My ben q mp512 projector keeps on shutting down. it will open normally but after 30 seconds it automatically shuts down. the temperature light will go on as well as the lamp light is turned on. the ...
...Auto-Shut Off Option. This May Happen. Try Disable Auto Shut-Off Option. If u still get the same problem then reset the bulb life once.. finally even if the above method doesn't work then you need to ...
Question about Optoma Office Equipment & Supplies
...shut down (not just went into sleep mode) Plug in power and power on the projector (make sure video source is on first) The projector should turn on and switch to the video source (manually select if ...
186 questions posted
Usually answered in minutes!
