Question about Provo Craft Crafts & Hobbies
...won't turn the machine. I am not sure what to do. my machine doesn't come on either they sent me a new cord and that is not the problem. I think it could be the switch board but no one will help ...
...not turn on, the power cord is working and putting power to the machine but the machine will not turn on The same thing is happening with mine. I probably haven't used it over 12 times! It came on ...
not working Hi, I have the cricut expression machine. Sold it to a friend and the dials aren't working at all. The size dial is stuck on 5 centimetres, pressure dial stuck on low, and speed dial stuck
...not turn on Any resolution to this issue? I like stone234 have narrowed it down to the cricut not getting power past the power board. I tested the two prongs that feed the red and black power for the ...
Question about Provo Craft Crafts & Hobbies
...turn it on the carrier moves to the right and makes a horrible noise. Nothing will work. Yes, the carriage does move to the right and it makes a funny noise as it moves. The cricut then should light ...
...not go through. If I removed one of the plastic plates then it was too thin. What am I doing wrong or is my machine defective? No I don't think your machine is defective. Here are some "sandwich" ...
...not use methanol, methalated spirits or acetone). if you aretrying to link the cartridge to CCR turn it round and if that doesn't work wipe the contacts but be carful doing this. If the cartridge ...
LCD not working and not all buttons come on My cricut was working this morning. When I came back after shopping it is not working. It turns on but the LCD does not come on and not all the buttons ...
74 questions posted
Usually answered in minutes!
0 Questions