RTO Mini Quads "apache problems" Questions

...problems with my apache rlx 450 quad and i have tested the stator and it is fine, so the only thing i know of is the regulator/rectifier and i am trying to find one second hand as i am a bit short of ...

i have an apache 3 channel helicopter.the top blades no longer spin so the helicopter just spins clockwise very quickly Same problem I had. There are two motors. One to spin the top blade and a second

Tremendous machine vibration My toy apache helicopter seem to have broken one of the "A" main blades and the top connect buckle got lost, all happened after a crash into the wall. I replaced the "A" ...

...apache. The upper propeller must spin faster thatn the lower propeller if not the heli would just spin on its tail although maximum power is achieved. The solution is to check the connection of the ...

I have a YIBOO AH 64 GYRO Apache HELICOPTER uj722 Hi I have a YIBOO AH 64 GYRO Apache HELICOPTER uj 722 with lights. I have a problem this item has one upper rotor and one lower rotor. the upper rotor

Yiboo AH-64 3D RC Mini Apache Helicopter, out of the box, charges, but will not do anything, channel C Mine worked good for 3 days then died..Top blades wont spin.. It worked really well. The guy at ...

my AH-64D LONGBOW helicopter spins out of control when i try to fly it how can i fix this problem? make sure the tail motor does not have any hair stuck in it take of the little propeller and clean it

s113g spinup problem SO I just bought my syma s113g apache heli, and I opened it up and started flying it. Sadly, I discovered that the helicopter randomly cuts power. It's extremely annoying as I

My helicopter wont come more than 6 inches off of the ground. What could be wrong? There is nothing tangled in it and the item is new. sounds like remote control is out of adjustment. Instruction book

X107 Mini helicopter does not seem to be taking a charge from USB port on computer. ran coptor for about 2 weeks following recharging instructions... rest, recharge of heli in "off" position