RTO Gas Motor Scooter "float bowl" Questions

...with the adjustments, what is going on is your float is stuck in the carb , you will have to take the float bowl off , float is sticking than you will have to try and clean the needle and seat

...is all that should be required. with the float bowl screws loose the bowl should never overflow in a static condition. If it does the float level adjustment is off. Thanks for using FixYa. ...

...float bowl to empty because either the main needle and seat is not allowing full flow or the inlet screen on top of the sediment bowl is plugged partially. There may be an added external fuel filter ...

spits and spuders in foward just like in reverse Try draining and cleaning the float bowl on the bottom of the carburetor.

My goped starts then quickly turns off what culd this be Bad gas. bad plug cloged fuel filter pin in float bowl stuck

My 50cc moped keeps flooding carb an won't start Sounds like the float is stuck open or leaking. Take the bowl off the bottom of carb and see if its working properly.

...that dont work try and take the bowl off the bottom of the carb and see if the little pin for the floats are stickin and clean everything while u r there and see how that work should fix the ...

FLOAT BOWL. EVERY TIME YOUR BOWL IS FULL IT CLOSES THIS VALVE. REMOVE THE VALVE(13 SPANNER)TURN THE PIN THAT ALOWS PETROL IN ,BETWEEN YOUR FINGERS TO LOOSEN IT UP. IT SEEMS TO GET STUCK CLOSED. AND BY

...bowl removed you should have enough gas flow to fill a spray paint can lid in 10 - 15 seconds. If you do not have this kind of fuel flow... inspect the gas lines and tank. Also make sure there is no ...

...bowl then konk out when it gets exhausted. Waiting a while the fuel would build up and then run fine until it is exhausted again. First thing to do is check fuel flow by removing the line into the ...