...Press and hold [LOCATOR/INTERCOM] until a beep sounds. • The CHARGE indicator flashes. 2 Base unit: Press the extension number [1] (handset symbol 1 ) or [2] (handset symbol 2) of the handset which ...
...off When the Charge light stops flashing, press Locator again In about 20 seconds, the handsets will deregister. When the displays read "Enter Base ID", deregistration has been completed
...Press and hold {HANDSET LOCATOR} until the CHARGE indicator flashes. KX-TG5422 base unit: Press and hold the handset locator button that corresponds to the handset you want to re-register ({HANDSET ...
Question about Panasonic Lands Phones
...Press and hold [ LOCATOR] / [HANDSET LOCATOR ] for about 5 seconds until the registration tone sounds. (this button may appear as a icon ). If all registered handsets start ringing, press the same ...
Question about Panasonic Lands Phones
...Press Locator on base 5 sec put on charger" When I did that, it displayed "registering" as the base beeped for number of seconds, and then it returned to the previous message. I Cannot get past that ...
...press "Handset Locator" ~ 4sec ( in-use light on ), set handset into the base cradle, etc. The manual is available from: www.manualslib.com but does not fully describe these procedures. Good luck
set > registration > base 1. When it requests a pin enter your pin 0000 BUT DO NOT HIT MENU YET. Hold the handset locator button ON THE BASE for 5 sec. then press MENU on the phone. It should register
...press "Handset Locator" ~ 4sec ( in-use light on ), set handset into the base cradle, etc. The manual is available from: www.manualslib.com but does not fully describe these procedures. Good luck
...press the locator on base for 4 second then press ok The locator? Service on a 7684 doesn't come from the base, it comes from the cell station. If it's registered properly, the base ...
Question about AT&T Lands Phones
...press /HANDSET LOCATOR while the IN USE light is still flashing. (The light flashes for about seven seconds. If the light stops flashing, start again with Step 1.) It takes up to 10 seconds to ...
34 questions posted
Usually answered in minutes!
1,197 Questions
619 Questions
465 Questions
463 Questions
293 Questions