Question about Mercury Car Audio & Video
what would make a clunking in front sepession of car on bumpy roads Most likely ball joint or tie rod ends
...your bulb first. check if voltage is getting to the bulb 2nd. check the ground connection 3rd (the ball hitch is the ground connection). If none of those things--you need to do some wire
...lower control arm bushings for wear, and check tie rods outter and inner for play as well as all ball joints in front ...
...know. I need one too and can't find anything on it. My son and I made one from a spring from a ball point pen. It needs to be expanded out in width - I used a screwdriver shaft to help do this. ...
Question about Jeep Car Audio & Video
...hitting the brakes and the front end goes to shaking really bad ive replaced brackes and calaper balljoints staberlizer bar axles brackes check both sides tie rods inner and outter also were wheel ...
...can't put this thing together. How do you put the spring on and where do they go also the round ball I can put it on but what about the clip attachment. I need full visual aide it's not spelled ...
...are in any other direction check tie rods by jacking car up and moving tire side to side. check ball joints by moving tire up and
31 questions posted
Usually answered in minutes!
29 Questions
20 Questions
12 Questions
13 Questions
