Pyramid GA610 600 Watts Dual Channel Guitar Amplifier "amplifiers" Questions

...can help identify if the problem is with the amplifier or the input source. Check for Overheating: Amplifiers can overheat and shut down to protect themselves. Ensure that the amplifier has proper ...

Mixer signals is on but qsc 1450 amp not giving any sound when main output is connected but when run aux send to amp it gives sound. What might be the problem. Mackie mixer 16 OK-qsc rmx 1450 main not

PV 1500 Amplifier I bought a Peavey PV8 and PV115 PA Package with a PV1500 amplifier. I can't get the amplifier to actually amplify the sound. The only sound that makes it through the system is what ...

i was just wondering how many watts the behringer xenyx 1222usb mixer can push? The board is a mixer only, not an amplifier. A mixer simply, well, mixes audio sources into a line output which then ...

just a loud hum when turned on. Hum is always connected with the presence of AC interference into the signal path of the amplifier, which means the audio amplification is mixed with the ac ripples. So

...could lead to the intermittent behavior you're experiencing. Overheating or thermal protection: Amplifiers often have built-in protection mechanisms to prevent overheating. If the amplifier is ...

Where is the fuse located in the Marshall amplifier mg100dfx The fuse in a Marshall MG100DFX amplifier is located on the rear panel of the amplifier, near the power cord. To access the fuse, you will ...

My Kustom KPM 7200 mixer amplifier would not power on. I replaced the fuse and it immediatly blew out. The 2nd replacement fuse also blew out. What could be the problem? There are only two mics and ...

Crate TX30E Taxi/Yellow Battery-Powered Amplifier. Lights up but no sound? Crate yellow amplifier. The power comes on but no sound comes out? Question edited for clarity (with a guess at ...

...with no input sources connected, the issue might be internal to the amplifier. Ground Lift: Some amplifiers have a ground lift switch that can help with noise issues caused by ground loops. If