Poulan 42-Inch Steel Deck 17.5 HP Briggs & Stratton I/C Engine With 6 Speed "husqvarna reverse switch" Questions

...Husqvarna dealer, buy a new ignition switch with proper keys. Someone with a little mechanical aptitude can remove the switch: 1) disconnect the battery, 2) unplug switch from the wiring harness, 3) ...

Husqvarna 54" yard tractor wont move can roll it but cannot get it to move forward or reverse and the parking brake is disengaged have a look at the safty lockout switch

when I engage the blade on husqvarna lawn mower the engine shuts off check the safety switch on the seat then the one for reverse cutting

runs until I try to engage mine has a reverse cut out when blades are running....maybe the switch is bad and thinks mower is in reverse therefore shutting down the mower when the blades are engaged...

...reverse safety switch has failed and the lawn mower thinks you are in reverse..so i would look around your foward-neutral-reverse shifter for it...i hope this has helped..if not write me back brake ...

...Husqvarna LGT2554 that will not allow blades to engage if it runs out of gas while mowing None. The only safety switch that prevent blades from engaging is the reverse switch but that will just kill ...

...by bypassing with a screwdriver but, when we pull the knob to engage the PTO, we have to disengage immediately because the engine shuts off. check ur reverse switch make sure its in froward ...

...when I let off the clutch? Most likely a bad seat switch Are you sure you are in low gear? Does it do this in reverse? Does it do it when you engage the blades? Make sure your throttle is high

...on mower by Husqvarna. Is there a main fuse which might have blown? Sounds more like a safety switch problem, first verify the seat switch then the mower switcher and make sure it's not in

husqvarna rider 155 won't start There was a problem with the engine stopping when the forward pedal (or reverse) was pushed. Checked the safety switch that controls that -switch checked OK. plugged it