Poulan 42-Inch Steel Deck 17.5 HP Briggs & Stratton I/C Engine With 6 Speed "engage blades" Questions

...Bolts are still tight and when installed Blade turned only if spindle turned Do Ray: If the blade engagement lever is in the disengaged position, the belt will be loose, allowing you to turn the ...

...blades not engage On most riding mowers flipping the handle to engage the blade causes an idler pulley to engage the drive belt, which takes up the slack in the belt and pulls it against the drive ...

Will this keep the blades from engaging? Micro switches will just stop the engine if the blades are engaged and the operator leaves the seat, or will stop the engine cranking if the blades are engaged

...engaging the the blades. Also if the blades are engaged and the operator leaves the seat the blades will stop. If a young rider with insufficient weight the blades will not engage. Hope this

...engage the blades. When I put on the new blades I made sure to clean out the deck. Any suggestions? It is a 48" deck with 3 blades. With blades on and engine off reach under and wiggle each blade up ...

Blades will not engage I have a sears riding mower model 917. The lever that engages the blade will not move. There appears to be a lockout on it. What are the possible causes of it not engaging? ...

...engage the blades just gaped the valves and coil new plug.starts fine but dies after i take out of park and put in gear or engage the blades ,held the blade engage switch down in park and engaged the ...

blades engage? Blades Engage via a pully system. Once you move the lever to engage the blades, the belt tightens and the blades engage. It is possible that your belt is broken or has gone out of track

Blades won't engage I think I got my lawn tractor too wet when I washed it, and now the blades won't engage when I start it. It runs o.k., but won't start the blades. I dried it out with a pressure ...

...blades are engaged. The seat switch and blade engage switch. Someone has to be in the seat when the tractor is not in neutral and or when the tractors blade engage lever is engaged. Other reasons for ...