Poulan 42-Inch Steel Deck 17.5 HP Briggs & Stratton I/C Engine With 6 Speed "blade not engage" Questions

...that adjusts height does not make blades turn. You need to engage the blade lever and if you can not tell if the blades are turning then they probably aren't. check belt it could need

...blade engage switch. Someone has to be in the seat when the tractor is not in neutral and or when the tractors blade engage lever is engaged. Other reasons for the tractor dying would be that the ...

...engage the blade causes an idler pulley to engage the drive belt, which takes up the slack in the belt and pulls it against the drive pulleys. A few odd-balls have an electric clutch to engage the ...

...blade engage switch down in park and engaged the blades it worked but when put into gear dies Check out the grass box safety switch. if not fully depressed it will apply brakes to the blades when in ...

...blade switch is pulled If you are sitting on the tractor seat and the engine stalls when engaging the PTO mover blades I would check the switch under the seat. This seat has a saftey switch to assure ...

Blades will not engage on Husqvarna riding mower. Our Husqvarna mower is less than 1 year old. It starts easy, the deck will engage but the blades will not engage. What to do??? Could be a broken belt

42 inch Craftsman blades won't engage I have a 17.5 Hp sears riding lawn tractor. The blades will not engage. I have cleaned the top of the mowing deck but still nothing. model 917258862 mower was ...

Stalls When engaging the blade clutch Tractor stall when pulling up the blade engagement knob. If I pull the choke and engagement knop together I can keep the tractor running, but with the choke ...

Mountfield Emperor 21 blade spins freely when engaged to cut. The blade stops when disengaged but wont cut when engaged as there appears to be no resistance when cutting and blades spins too slowly. ...

Safety switch located where is the safety switch located? Will this keep the blades from engaging? Micro switches will just stop the engine if the blades are engaged and the operator leaves the seat, ...