Pentair Meteor Above-ground 22" Sand Filter System w/ 1 HP Pump "port valve" Questions

Ad

Question about Danfoss Garden

2 Answers

...valve in the pump. There may also be cross port reliefs in the motor. These too must be set higher than the POR valve in the pump. If you system overheats after increasing the pressure setting of the ...

Ad

Question about Hayward Garden

1 Answer

...valve is leaking at port A. The O-rings are new and lubricated. How do I replace the backwash valve? You probally just need to replace the top assembly and the spider gasket in the valve

Ad

Port is the one under the valve position WASTE and is the easy one to find! The other ports are labelled Return- which is the line going to the pool and Pump- which is the one that comes from the pump

Question about Hayward Garden

1 Answer

...the top of the filter and out the bottom for return to the pool. When manipulating the valfe (multi-port or push pull), ASSURE the pump is OFF! If multi-port valve, only turn the handle

Question about Hayward Garden

1 Answer

...valve like your post suggests there will be a word cast into the black plastic area near all three ports you need to connect. One will say pump, another return and the last one waste. Pipe the pump ...

Question about Pentair Garden

1 Answer

...valve label sticker, call the Pentair Customer Support 1-800 number. They will send you out a new label, free of charge. For referrence, the waste position is ALWAYS over the waste port on the

Question about Hayward Garden

1 Answer

...port contiualy lowering pool water level. Your question was posted under "Pond and Water Garden Pumps", but I assume you are really asking about a swimming pool filter. Unscrew the control valve from ...

Question about Waterway Garden

1 Answer

...Assure that the o ring is positioned onto the multi-port throat correctly. That could cause dirt to recycle into the pool water.It could also be issues with the multiport valve in the pool

the gasket/diverter, so you just line up the diverter sections with those in the bottom of the valve and replace the screws. Just in case, the WASTE position is always OVER the Waste Port on the valve

When setting the pump to pull only from the skimmer on my in-ground pool, it doesn't **** enough water to keep the the suction pump full of water. I have to set it on main drain or ''skimmer & ...

Not finding what you are looking for?
Pentair Meteor Above-ground 22" Sand Filter System w/ 1 HP Pump Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top Pentair Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pentair Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...