...spa keeps flashing and key pad not respond well Sounds like control panel failure or the keypad is locked/stuck.Try hold temperature UP & DOWN together for 6 seconds. or if you have a Balboa 7 ...
Question about Jandy Pool & Spa
...flashing yellow. The pump program still activates and runs as programed but nothing works when I manually press any of the buttons (i.e. pump, spa, spa heat, blower) I don't have the "one-touch", but ...
...Spa side Control Panel We have an older Balboa Spa and have a "FL" flashing on the Control Panel, low flow thru both of the Pumps and the Heater will not come on. We have pulled the heating element ...
...spa light works fine but the pool light flashes like a strobe. Hayward rep says "mother board" is probably bad. No repair service available. Hayward solution: Buy a new one to replace the defective ...
...control all the lights started coming on and off. The pool light would turn on then the spa heat button would light up then the spa light the pool light was flashing on and off etc...with all the ...
control, all the lights started coming on and off. the pool light would turn on, then the spa heat button would light up, then the spa light, the pool light was flashing on and off, etc...with all the
...spa) at maximum temperature. I have manually turned it off using the black knob on the front of the heater and left it for a few minutes, then turned it back on. It is auto ignition. When I put the ...
...spa on & saw it wasnt heating up saw there were no lights on the heater opened front panel, the wire assembly from control panel to the gas valve was fried. right at the gas valve the ground and ...
59 questions posted
Usually answered in minutes!
337 Questions
104 Questions
92 Questions
