...heater started a week ago when I opened the pool. The temperature went up to 77 then the heater shut off. I have not been able to get it to run since. It starts and within 5 seconds it shuts down and ...
pool heater fires up and starts heating the water outflowing into the pool, but only stays warm for 5 minutes or less then cools and stops heating You are tripping a temp limit switch. You either have
Sta-Rite SR 4001. Starts and stops Error Code E 05 Flu Stack Sensor
programs won't hold revert back to 1pm start and stop program at 2:00 am to 1:59am that should run all day
pool heater after winter being off, heater starts and flow meter needle goed very high and heater stops then displays dhp. Prim your pump and let it pump for 10 minutes with out heat. Then try turning
I have a LX250, when I turn it on the blower does not start. The blower started once and the control panel was flashing heating. Then it just stopped and wont come on again. Usually its the fuse or ...
Pool Heater. Hayward H100ID Starts fine and heats for about 5 minutes. Then heat stops. You can feel the blower its just cold air. It sounds like your pool heater is not firing. I would check several ...
...heater for pool while pump in on, everything is fine, pool heats then when timer stops pumping, the heater will stop but the digital temp climbs,on display and eventually goes on the display ...
33 questions posted
Usually answered in minutes!
774 Questions
131 Questions
104 Questions
113 Questions
87 Questions