When the pump is on there is water leaking at the motor shaft between the Impeller and pump. What could be causing this? The shaft seal is bad. That should use a PS-200 seal. Shaft seals are failing. ...
Pentair 011523 pump shaft seal is leaking. How do you remove the impeller and motor? Separate the plumbing portion of the pump from the seal plate which is attached to the motor. The bolts will be a 9
...filtering when filtering moter leaks between moter and filtering basket Is it leaking at the motor shaft or where the filter gasket and pump housing bolt together? If between the two ...
Question about Emerson Pool & Spa
How do you take the empeller off the shaft to put it on the new m How do you take the empeller off Take the back of the motor off, just a cover, you should find a flat spot on the shaft to fit a ...
I have a Pentair 2.0 pump that I am trying to remove from the impellar. The shaft turns allowing me to turn the pump part itself but I can not pull it loose from the rest of the housing. How exactly ...
Question about Jacuzzi Pool & Spa
...from a/o smith 7-181327-03 pool pump screw on type rusted If the impeller is fused onto the shaft by rust or mineral build up the chance you will be able to remove it with out destroying it ...
can my shaft spin and not my impellor. how can i check the impeller is usually screw onto the shaft or the shaft has a D (flatspot on one side to lock impeller) so no, the shaft cannot spin without ...
spa pump k55mygrd-8367 Pump noisy.Can I just add a few drops of oil to the visable shaft or do I have to replace it k55MYGRD-8367 Most common and likely situation with this,... mechanical pump shaft ...
Question about Pool & Spa
...normally be backwards threads. Remove that. know if the impeller should unscrew off of the motors shaft, that will be normal threads. But, to do that, you will have to lock the shaft from spinning. ...
pump seals trying to replace pump seals and can't get impeller off of shaft The impeller is threaded on to the shaft. The trick is to hold the shaft in order to untread the impeller. The surest method
62 questions posted
Usually answered in minutes!
102 Questions
34 Questions
31 Questions