Zodiac Baracuda G3 Automatic In Ground Pool Cleaner "cleaner wont clean" Questions

cleaner wont go . I cleaned the filter. and checked the cleaner for cloug .every thing seems ok.It wont go whith the main pool pump on and the booster pump on too. pull the hose up to the deck, ...

...Cleaner: my creepy crawler wont hammer... My creepy crawler wont hammer This usually happens when there is a small stick jambing in the bottom of the openning in the Kreepy Krauly where it sucks in ...

...clean. there is a small button/ knob on the robot by the one wheel, there is no mention in the manual about this, do i need to do anything here? Here is a copy of the users manual for these pool ...

...wont clean the bottom.I have placed the weights in the correct position. Any suggestions? Try no weights. Try weights in a incorrect position. How is the hose....is it flexible......is it steering it ...

...wont rotate it just sits there in the pool doing nothing Inside the housing there are 2 hoses that sometimes come loose. Take the housing apart 3-4 screws and it seperated in half and you can see the ...

...wont clean the deep end of the swimming pool. Your situation is unusual in that most of the time these will stay in the deep end and not get to the shallow end. Make sure that your hose is the proper ...

Aquabot wont pump or move, intermmittent Hello; I noticed my Aquabot shutting down periodically during use. I keep resetting it, but sometimes it just sits there. I have tried resetting the circuit ...

...wont even run my pool cleaner no pressure i just changed the sand last year any ideals ? If there is not much pressure, the problem is with the circulation system. Probably the pump. When a sand bed ...

...CLEANER MODEL 2906 ,THE SECOND SEASON USING .I HEAR THE MOTOR RUNNING ABUT THE WHEELS DO NOT ROTATE IT STAYS AT THE SAME LOC .I CHECKED THERS NO DEBRI ON THE SHAFT AND I DO HEAR THE MOTOR OF THE ...