...skimmer basketsObstruction in suction line(s)Breech in suction lineMissing/ cracked/ dried out pump lid o-ringPump pot basket full of debrisClogged impellerBroken pump seal These account for 99% of ...
...skimmer, and it is not getting sucked dry. Next lubricate the pump lid gasket, and try some silicone around the threaded pipe on the front of the pump. If all this fails you could have some debris ...
...skimmer has poor suction and I've adjusted valves in various position and it is not functioning properly? change the gasket on the pump lid. If this doesnt work seal inlet to pump with silicone as a ...
...skimmer lid. Check your pump lid and "O" ring for cracks and be sure it's lubed correctly. Check the plumbing going into the pump and be sure it is tight. If you loose prime or the pump runs with a ...
...skimmer, and it is not getting sucked dry. Next lubricate the pump lid gasket, and try some silicone around the threaded pipe on the front of the pump. If all this fails you could have some debris ...
lid oring that is allowing some air to get sucked in. sometimes everything seems to be operating fine until the system gets up to full pressure. perhaps the pump has run dry at some point and the pipe
...skimmer dry. Next try lubricating the gasket on the pump lid, or if it is in bad shape (flattened/cracking) replace it. If this does not solve the problem put silicone around the inlet to the pump ...
...and your plumbing is tight and the lid "O" ring on your pump is good and seated well. Also if you have a skimmer plate be sure your front hole in the bottom of it is plugged off solid. Good
...lid dry rotted or cracked? Is the impeller spinning? If the impeller is not spinning freely then there is something stuck in the impeller which can usually be cleaned out with a screwdriver or your ...
186 questions posted
Usually answered in minutes!
1,045 Questions
774 Questions
337 Questions
287 Questions
