Universal Kreepy Krauly In-Ground Pool Cleaner "moving" Questions

tiger shark has bubbles coming out of top but will not move bubbles come out of the top but will not move Something is caught in the tracks that make it move. Look under the blue track that move it. I

plugged in and turned on but doesn't move look at the rubber belt wrapping the wheels, there are some little rubber numbs along the belt in order to grap the wheels and make them move. If some of the ...

Krauly gets tangled in the hose constantly and will not untangle With these pool cleaners, that is almost always going to be a problem with your hose balance. To determine if your balance is correct, ...

my kreepy krauly is moving at half speed and sometimes stops moving all together. All tubing is good, filter has just been cleaned, any ideas? Check your pump pressure on the suction side. If there is

...no movement. There is a piece in the mouth of it that is supposed to move back and forth but is not moving. I think that is the problem. What can I do? Replace the flapper valve with a new one, this ...

...need to move the first weight about 8 to 10 inches from the Swivel Head. 3. Does the cleaner stop moving in the same area? When your system is running, can you see the water "rippling across" the ...

stops moving Regardless if on ''timed cycle'' or ''continuous'', my unit shuts down. The power box indicator light is still red indicating that power is available; however, the pump and tracks stop ...

Our Pentair Legend moves to a wall and stay there Our Pentair Legend moves to a wall and stays there until the backup moves it and then it goes to another wall....spends way too much time on the walls

Baracuda G3 zodiac Clings to bottom or sides moving slowly The cleaner clings to bottom of the pool or sides moving and oscillating but moving much slower than normal here is a link to the Technical ...