RTO Cummins Onan HomeSite Power 5500 "generator runs output" Questions

no voltage output from my 13kw Northstar generator. 20hp Honda engine runs fine. What malfunctions could cause this? My generator has a switch to turn on the output, you must turn it "ON" to get power

...Generator starts fine and runs only about idle. No voltage output until you manually speed up engine throttle. Anyone know problem or where to find parts or info?? THX, Rick chek brushes...if they ...

...generator. Starts runs good no ac output and display is blank Was running fine then I shut it down for couple hours, started back but this time no ac output. Checked breakers ,okay. No thing on ...

no power output My generator runs but no power. After running about 16 hours there is no power output. This unit has been used twice. Each time this happened. I posted an answer that may help here.

...5500 - no power output, but motor runs fine Motor runs fine, but the generator is not giving power to the plugs... Is the Output switch in the "ON" position...the switch is normally on the Outlet ...

...generator runs fine but doesn't produce any output voltage. It did wirk when I first got it but within about 2 hours it stop putting out power. check breaker, your outlets should be like a gfi Check ...

...no output: breaker good. 560 operating hours; runs great; no output: breaker good. Is there voltage on generator terminals. If not you must recharge the field or check the Voltage Regulator ...

...generator runs but does not produce electric to rv Generator Runs good but does not provide power to inside of r v First verify that the breaker for the outlets is not tripped and make sure that the ...

...output from Briggs & Stratton ProMax 7500E generator The engine is running but the power faded & there is no power output at all. Does anyone have a fault finding / repair manual for this ...

...runs fine,but has no AC output. no-AC output problem have you conected the brushes on the right way? the leads are + and -. you can run it up and use a 12v battery and connect it to the brushes ...