Malibu Intermatic Inc. ML300RTW 300-Watt Power Pack with Timer and Ground S "reset button timer" Questions

Reset button is small round button. Push in reset with toothpick or paper clip. Then reprogram timer. If you have Intermatic ST01C or EJ500 battery operated timer: Replace battery, then to reset timer

...reset button, then all programs are lost, plus current time of day. Generally this timer needs to be reset if error message appears and as last resort for troubleshooting problem. Timer does not need ...

...reset button is a small round button that you push with a paper clip. The ST01C memory for current day can be cleared by removing battery for a couple minutes, but the day-to-day programming remains ...

...reset button. Press reset button and see if timer display is restored. Some timers require additional button pushed along with reset button, some timers require 2 buttons pushed to reset timer. Some ...

...reset button and will not respond. Red on light stays on Wanted to reset my Utilitech LW0418. Pushed the place that says reset. None of the buttons will respond. Red light stays on and will not turn ...

...reset button. Release reset button. Keep holding down on-off button until display changes. Then release on-off button and reprogram timer. http://waterheatertimer.org/Flipdown.html ...

...reset button using paper clip. Keep holding ON/OFF button until display changes This timer uses CR2 battery installed in tray below the buttons. Reset timer after installing new battery. If ...

...reset button is small round button with R I assume you push reset button with toothpick The manual is unclear if you need to press another button at same time to reset timer Manual says: If needed, ...

reset button. It appears you can reset timer by removing small battery located on back of timer. Battery serves as a back-up for timer settings, and display will not show without battery. Most battery

...reset button without holding down ON-OFF button. But my timer is fairly new and hasn't malfunctioned. A lot of folks write-in about ST01C that just doesn't work any more. To reset timer: hold down ...