Eureka Smartvac 4870 Bagged Upright Vacuum "roller moves suction" Questions

Ad

The rollers won't move and there is no suction. Any idea why? If the rollers don't turn, the belt is likely broken or stretched. That shouldn't keep the suction from working though. Maybe clogged ...

Ad

...suction in upright position My the roller bar does not rotate and loss suction on my Hoover Wind tunnel unless the handle is held nearly parallel to the ground. Both belts are good and the roller is ...

Ad

...moves as you flip the switch from floors to carpet. The belt does not go around this pulley. When activated(carpet) the pulley puts tension on the belt causing it to turn the roller. When switched ...

...suction and get the roller bar moving? THE IMPELLER LOOKS SHOT.. 25 QUID FOR NEW ONE,,LIFT THE LID AND TURN THE ROUND PIN AND CHECK FOR RIDGES ROUND THE WHITE IMPELLER,,IF NONE THERE THATS IT,, ...

...moves easily on carpet with the selector on the base set to hardwood floors (in self propelled mode). What happened? The self propelled mode seems to work well on hard floors and with the floor ...

...roller is not moving and so no suction. When I turn the front part so the green arrow is aligned with "Belt On" and then look at the bottom where the roller is, it doesn't look like the belt is ...

roller is running, but I felt very little suction. An Ultimate G has lots of suction. If you turn on your vacuum and the bag immediately inflates - that is how you can tell if your Kirby is moving air

...suction are too severe and the hoover will not glide over the carpets, I have tried adjusting brush adjuster and it makes no difference look for a blockage -something may have dislodged the lever ...

Question about Eureka Vacuums

1 Answer

The air hose for the vacuum is working fine but the main vacuum is not getting any suction and the brush roller is not moving. you have a clog between the hose connector and the roller brush

...while you vacuum? It is probably because your vacuum has too much suction for that particular mat. Try adjusting the height setting of the roller head to be further away (less suction). That may

Not finding what you are looking for?
Eureka Smartvac 4870 Bagged Upright Vacuum Logo

199 questions posted

Ask a Question

Usually answered in minutes!

Top Eureka Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Jo Ri

Level 1 Expert

17 Answers

Alexander

Level 2 Expert

171 Answers

Are you an Eureka Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...