Question about NRS Home
...Single Hole Installation Lavator: how do you install a chrome faucet without scratch... How do you install a chrome faucet without scratching or damaging the chrome? wrap the faucet with a ...
...install a vessel sink on formica in my bathroom? The faucet will be installed on the formica counter. Will that work or will the counter eventually buckle? Thanks This can be done. However, before ...
...faucet that will use the 3 holes and install a soap dispenser, filtered water spigot, or a instant hot water spigot to fill the fourth hole. If 3" is not a typo you might try to contact a granite ...
...the first Euro faucet with good flow. Why is the water flow so low on a brand new faucet. when you installed did any teflon tape or debris get inside? you can remove and reverse flush with hose and ...
install then. there is a brass ring under the sink that is holding the faucet tight to the sink. this has 2 water lines that feed the faucet and the line to your spout. if the copper
installed a grohe k4 faucet and it will not retract back into neck of faucet. is the spring directional? Could be hung up if this has a weight to pull the hose back........
The faucet base doesn't sit flush with the sink when installed. There is about a 1/4 inch gap between the sink surface and the base of the faucet. Typically there is a plastic piece that sits in ...
faucet box and would like to install this. Can a hole be drilled into the sink with a hole saw (with a fine tooth)? i'd refrain from trying to drill the porsilen myself. if it's a metal sink go for it
...nut. turn valve water off. Quickest fix is buy new plastic sink faucet nut and sink nut removal/installation tool from Lowe's or Home Depot. Take off old and install new. Turn valve water on and
Freuer faucet leaking Faucet leaking above the sink Contact Freuer faucet and get free replacement parts. I was even sent complete unit that I had to install.
4 questions posted
Usually answered in minutes!
22 Questions