Sony SPP-S2730 Cordless Phone "base set not ring" Questions

...the base to make it softer or turn it completely off. Note: If you set the ringer volume to Off, the handset or base won't ring. Other handsets or base will ring according to their individual ...

...base maintains its own ring tone and volume level setting from factory. Therefore, the base will present its own settings along with the handset setting during an incoming call. So, one has to lower ...

...Set base unit? by pressing [d] or [B], then press Select. 4 Press Select at ?Ringer tone?. 5 Select the desired ringer tone by pressing [d] or [B]. ? The base unit will ring and the ringer tone will ...

...base phone has the normal tring tring ring but my hand set has a melody so when the phone rings there r 2 different rings i have a very basic model no is AS-8111 just purchased it 2 weeks ago from ...

...base unit does ring. I have 2 Samsung4 cell phones paired to the base unit. When one of the cell phones is called the base unit rings but the cell phone does not ring. How can I fix this? settings ...

...base is a button next to the GE logo that says "Do Not Disturb". Pushing that button will enable and disable that feature Have you set up the handsets? You must set them up, by following the ...

...base unit how do I set line 1 to ring and line 2 to not ring on the 8825 Base Unit? You can adjust the volume and pitch of the ringing by pushing Menu, scroll forward to Desk Station Settings, push ...

set the base machine setting to answer after 6 rings but it didn't change. If you have changed the setting on the base station and that did not work, power your base station off completely and try

...base (between Set and Menu). While the handset is sounding the paging tone, replace the handset in the base. Leave the handset in the base until the flashing stops (more than 5 seconds). See page 47 ...

ring for incoming calls on the line? http://service.us.panasonic.com/OPERMANPDF/KXTG4500B.PDF page 80,do this first, then if you want to reset both phone and base, clear base unit settings to default,