Question about AMD Computers & Internet
turn on the computer check for Led's on the computer If still no display ,shut down the computer,disconnect power cable. Open the computer tower,remove memory modules,reconnect power cable and turn on
turn on or would be faulty. It means that the monitor is not getting picture from the computer, the cord could be loose or the computer has a problem and its unable to start up or send signal. you can
turn on the computer check for Led's on the computer If still no display ,shut down the computer,disconnect power cable. Open the computer tower,remove memory modules,reconnect power cable and turn on
Question about AMD Computers & Internet
...setup in the bios to not turn on after powerloss. you must wait for the on, then off to occur, then you can turn it on. The fan in the computer is probably loose, or possibly old, if not its
computer does not turn off. I'm not going to buy a new computer, so I don't know what to do. "the computer does not turn off" So something started up? Fan? Hard drive? There's probably a switch on the
...Turn off the computer and remove the wireless adapter and then boot up your computer, if it still does not boot up then the motherboard most likely been damaged. I suggest you take it to a computer ...
Question about AMD Computers & Internet
...turn on computer first and 3 second turn on your lcd. if NOT try powering on computer then Monitor then power the computer then monitor. IF NONE worked, YOU may have LCD that need drivers from ...
Question about AMD Computers & Internet
...computer was not turn off so in order to turn it off I unplugged the power cord from the computer. I came back in the morning to re-plug it to the back of the computer. When I did so, the green light ...
Computer will not turn on was working on computer it turned off, I cleaned the fan but it still will not turn on. Do you had any errors on boot like a blue screen or any screen readable errors.
...Turn off the computer. It should remain off at that point. If the computer keeps comming back on , you need to do some more configuration such as ( do not wake up on USP device ) that may be in your ...
34 questions posted
Usually answered in minutes!
39 Questions