Question about Franke Plumbing
...putty adhere to the foam gasket? Usually the gasket is not foam but black rubber. There may have been a piece of foam as packing to protect the stainless. You would apply the plumber's putty directly ...
plumbers putty on the top part of the sink under the top section of the basket. Hint if you put some soap on the gasket under the sink between it and the nut it will be easier to tighten also you must
what is the proper way to install a BLANCO sink strainer Kitchen Sink COD.100113 I believe is the code # Thank you Hello, W/D here. To install your strainer, you'll need some plumber's putty. The old ...
...sink, white gasket, black rubber, drain pipe? Is this correct? basket silicone (or plumbers putty) sink black rubber white gasket strainer nut vinyl tailpiece washer tailpiece (drain) tailpiece ...
plumbers putty with the white and rubber large 31/2 inch washers with the 1135 strainer and where do each fit yes you do. you put the putty under the chrome ring. the rubber and white gaskets go under
...plumbers putty and no rubber gasket I'm not sure what your question is, or if you are posting information. Plumber's putty is purchased at local home center, hardware, plumbing outlet. Container is ...
...plumbers putty under the top ring, as it has a nice small rubber gasket. The order of installation starting from the top side is the flanged drain then a bead of plumber's putty, and don't skimp on ...
...plumbers putty on the top? Yes. The cardboard washer is the last thing before the nut and the rubber goes next to the sink bottom. The cardboard washer is to keep the nut from grabbing the rubber ...
3 questions posted
Usually answered in minutes!
2 Questions
2 Questions
