Question about Husqvarna Garden
...Cylinder is scored in the chainsaw, was wondering if i could get help on how to take it apart, or if I can even just hone out the cylinder to get it running. You can do that. But it would not run as ...
rebuilding 268 husky does it matter how the piston ring gap face , toward intake or exhaust port, and should i rougg old cylinder with steel wool? point the ring gap toward nothing! in between exhaust
Question about Husqvarna Garden
compression low...what to install new rings , hone cylinder , reb ...need parts diagram, engine, carb etc. Have model and ser # available ...
...chainsaw has no compression. help. no compression Pull ot the spark plug and look for any metal shavings on the plug. If you find some the saw in done. My first guess the saw was run with the wrong ...
Question about Garden
...cylinder may need to be honed, if it doesn't make a difference put enough oil in the cylinder that it will get oil into the crankcase where the bearings are for the piston, pull iy over with plug out ...
I ran my husquavarna for 10 minutes on plain gas.It wont start.Is it permanently damaged. Check the compression . A quick check is to ground the spark plug lead , then put you finger tightly on the ...
...chainsaw won't start,one of my friend use regular gas instead of mixed one Well depending on how long he ran it for, i suspect, it has seized, in the Bore, this is what happens if there is no oil in ...
I have an Olympyk 970 chain saw. It is diffucult to start, then only runs a few seconds, will not speed up. I have changed the spark plug, new gas line, new piston and rings. new carburetor kit. ...
I need instructions and parts list for a seized stihl MS170 as the shop says it is not worth repairing if it's seized, first off, take out the spark plug and pour a little diesel in it. You can get ...
155 questions posted
Usually answered in minutes!
778 Questions
175 Questions
92 Questions
66 Questions
77 Questions