Husqvarna Partner Gas Powered Cut Off Saw K960 16" "start" Questions

While using the masonry cutting blade, the unit just quit. Have not be able to get it started. Have let it sit for hours, and now days and it still will not start. start with the cord. do a continuity

how to fix a pull start on a petrol grinder Not that this is 'The' solution, but, Nearly all pull start mechanisms, are the same. More often than not, there is a little 'Lug', which blocks the spring.

What is meant by a soft start Soft start means that your grinder will start at a slower speed, then rev up to the normal speed, so the grinder won't "dig" into your work. Hope that helps. Handie Andie

honda self propelled difficult to start on first job each day. Attempt to pull start about 12 times, won't go. Rest the mower for ten minutes, then pull start a few more times and mower usually starts

TS400 has problem drawing fuel on inital start of the day 14plus pulls. fuel must be returning to tank leak back. as it starts usually first pull after inital start. You could be flooding out the unit

my stihl saw ts400 start gran when cold but when you stop it and try to start it agin it wont start untill it cool's down and then it start ok my stihl saw ts400 start gran when cold but when you ...

Brand new saw but cannot start it (for the first time) It has a spark but don't think it's getting fuel. I don't if this helps but is there a pump for the gas, I had a brand new chain saw and it was ...

ts400 doesn't start up, used to start but when it warm up turn off. now it'll nat start at all. Sounds like it is Over heating to fast take to the shop and see if they can find you a part or you can ...

Ts 410 STIHL DISK CUTTER recently had a 156pounds service as cutter would not start after lots of heavy use.NOW AFTER ON A REALISTIC AVERAGE OF USAGE SINCE SERVICE:45 MINUTES MAX USAGE in 6 months Ts ...

Not cutting Starts ok, idles ok, revs ok, but when I try to cut concrete blocks it starts to cut then the engine cuts out. Try to restart and it starts first time. Please be more specific with your ...