Hunter Low Profile III 20807 Ceiling Fan "fan runs high speed" Questions

...fan is turned on to high speed it runs at medium speed. When switched from high to medium the speed does not change. Most fans have a small rectangular multi-tap capacitor connected to the speed ...

...Fan is several years old. Now runs only on high speed. Powered off, then pressed and hold fan button. Initial slight movement of fan, but then nothing. Quick press and release of fan button, and fan ...

remote to run the fan on high. 2. Pull the fan speed chain until the fan reaches high speed. 3. All speeds should work normally now. The remote is modulating the maximum speed as set by the pull chain

...runs on high speed My fan that I installed yesterday (new Fan) makes a knocking soung when run on high speed only. At other soeeds it is fine. The bolts might be loosely fitted. So try to fit them ...

...fan it also runs at a slow rpm at high, but the problem I;m havig is it automatically changes from high speed to low speed, it has even been at a complete stand still in the morning when it was ...

...fan on high unless it's a low-end fan with a low blade pitch. It's costing you more money to run the fan on high. Sorry to get so preachy, I'm a fan dealer . If your honey bumped the fan while it was ...

...fan. It will run high speed in the high position, but only low in the middleand low speeds. Replaced the pull switch-no change Replacing the pull switch (reostat) should have solved your problem. Try ...

...Fan 90021 that only runs on high. How can I fix the motor so that it will run on all three settings? I have had the fan for several years, so it isn't under warranty. The other speeds slowly started ...

...fan running on high only with the remote.I called customer service and they are sending a new remote.I don't know if this will solve the problem until I receive the remote.Meanwhile if anyone has a ...

...fan only runs at highest speed Pushing the remote button, the fan acknowledges ("beep") and it kicks the blades but won't keep going. If I push the button to the highest speed, then it kicks in and ...