Stanley Bostitch 00540: 00540 AntiJam ? Extra Heavy-Duty Stapler "replacing spring staple gun" Questions

staple gun. (The spring mechanism discussed above) Remove any staples in the gun. Try to use a flat blade screwdriver, and see if you can shove the flat metal hammer in the front of the gun -> UP.

spring were you reloading the staple gun, now you want to put the spring load back in it to lock it to use it? slide it in, and push downward to lock it in. question how do you replace the spring back

spring and any staples loaded in the magazine. Then try firing the gun to clear the staple. Use a small jeweler's screwdriver and small needle nose pliers to get the staple out. Reload and test. These

...spring in an upholstery stapler ? the gun stop from shouting out the staples and the spring came out Good luck with the exchange Call the manufacturer and ask to have the step by step spring and ...

...GUN 1000 is broken. Spring on my stapler is broken. It cannot push the staples any more. Please tell me where to get a new spring and how to replace it. Junk it, peice of ****!!!!! Extra heavy duty ...

...spring with a push rod on it. Insert the new staple bundle and replace the push rod. If this is a desk top stapler then pull the top until it opens. Set staples in and close the top again. Make sure ...

...staple gun. It is spring loaded so push in and down. You will see the tab that holds the slide in. When it releases, pull it out and insert the replacement staples. then reinsert the slide and fasten ...

...spring for the staples. The picture shows the internal schematics of an EasyShot 5650 staple gun or tacker by Arrow. It was taken from a reverse engineering project for school kids. Unlike the boring ...

...spring came off. Not sure how they go back again Call the manufacturer with your email address and request step by step instructions on replacing the pusher and spring in your specific model

How to load staples How do you load staples? Staples newly purchased will always be attached when purchased and that answers your question...wherever the device u are loading has a horizontal channel,