Uniden TRU8885-2 Cordless Phone "shows line hold" Questions

line. Before plugging back in hold the on-off button and the clear button (the circle with the line through it) down and plug the line back in at the same time. A "P" should flash on and off and the 0

...line, put it on hold and then hit transfer to voicemail. Now two lines are showing that they are active and we cannot pick up either line to disconnect it How do we fix it? Turn off Ksu by unplugging ...

...to be in use when not On a two line system both lines keep showing the red light as thoufgh in use . Blinks as though put on hold by themselves . How do I turn this off? Do you still have the

...hold. If you switch from line to line, you put the calls on auto hold. It doesn't take much to conference two lines together and drop out of the call. Now you're at the mercy of the Central Office as ...

...LINE 6 HAS NO DIAL TONE AND NO ARROW SHOWING ANYONE IS ON IT OR ON HOLD PLEASE HELP The first thing to do is reset the system by power down and up of the main system on the wall, It sounds like a co ...

...line on hold. sounds like your telephones not programmed for handsfree. Programming is done on 7310, 7324 and 7316 type sets.Enter programming by pressing the feature key followed by **266344.When ...

Lines 1 and 2 show in use but no one is on them. How can I fix this? That's usually because the voicemail system is holding on to the line. A reboot of your phone system or voicemail system will ...

...shows on your screen when you don't have any messages or after you have checked and erased your messages - hold down the "clear/mute" button until the phone beeps. It should clear off and show the ...

...hold button is or even a line button is...if someone has some real information please submit it! Oh and i have already tried calling norstar...they tell you to call meridian, then meridian tells you ...

...hold when phone line is ringing it is not showing the usual black triangle next to Line 1, 2, 3 etc. Once answering a call and placing on hold then again it's not showing a line in use. The beep beep ...