line that's receiving the call. Your Panasonic "Operating Manual" lists these codes and methods with instructions, you'll find them listed in the table of contents under "Call Forwarding" with step by
...line from two junction boxes and it works fine. I tried this, per the tech's instructions by phone, but Sel/Save didn't stop the recording. He advised me to unplug the phone, remove the ...
seperate phone units. Have unpluged/unpluged phone lines from wall phone outlets. Still same problem. We followed your instructions and are not sure what worked, however, this AM phone line is working
...low line voltage, or didn't follow setup instructions. Try looking to see if your base cord is not plugged in properly or if there's an instruction to start with or without batteries. ...
...Caller ID and call the phone from another line. Once the data is sent from the TelcoCO, it should sync with the device. Again, if this doesn't work just follow the instructions above. Redirect ...
...3rd phone line which is fax line). This is a programming issue with the phone .There should be a pull card located in the base of the phone that will give you instructions on how to program the
Question about Lucent Lands Phones
...line 3 button. This is the easiest way, if you have some phones that are set not to ring, then do NOT follow these instructions. From extension 10 or 11 Feature 00 Left intercom Left intercom #104 ...
...line one back? Here is a link to the instructions in case you don't have them http://service.us.panasonic.com/OPERMANPDF/KXT7720.PDF have a look at page 2, also the section on "clearing all
Question about Lands Phones
...line may affect the overall call quality and performance, so it's important to follow the instructions carefully. Here's a general guide to help you set it up: Obtain the Necessary Equipment: ...
4,850 questions posted
Usually answered in minutes!
1,326 Questions
1,157 Questions
514 Questions
232 Questions
194 Questions