Nikon LS 2000 Film Scanner > Search
Nikon LS 2000 Film Scanner led
multi/cardreader when card is inserted power led lights up,no information is read or device is not seen more...
and scan again. Make sure contrast/rightness settings are okay. If one side output is still not okay, then it possible that the lighting has failed. Either loose contact or failure of the lamp. Some scanners have LEDs and some have a lamp. S. Mohan more...
I cleaned my scanner and still getting an error reading: "Open door, remove paper from scanner". I cleaned the sensors and the led indicates error more...
can be inserted in the scanner while the scanner is on. Before mounting an adapter in the adapter slot, check that the scanner's status LED is glowing steadily. Adapters should not be inserted or removed while the status LED is blinking. Open the scanner's front cover and slide the more...
eject film from the SA-20, click the eject button in the scan window. Once the current film has been removed and the scanner's status LED is glowing steadily, new film can be inserted in the scanner and previewed as described in steps 4 through 12. If there is no more...
Cannot operate! 1. Please check whether the scanner connects to the computer. 2. Make sure that the scanner connects to the power, and the LED is on. 3. Note that you can not connect the scanner to the bus power drive. My responses to that error: 1. It does. more...
4 2. Parts and Accessories Nikon LS-2000 35 mm Film Scanner User's Guide 2.2 Parts of the LS-2000 Status LED Feet (used when scan- ner is on its side) Transport locking screw Sliding cover Adapter slot Feet (used when scanner is on its base) more...
Back to Nikon LS 2000 Film Scanner page.
Sponsored Links
Repair Service
Find Scanner Repairman Near You:
= Poor
= Average
= Good
= Excellent
