Epson WF - 7520 My epson printer won't print 72 cm by 27 cm banner it's divided by three, I want in one long paper what can I do? My EPSON 7520 printer can't print the 1m banner I buy for that
...screen out of line Have a few handhelds where the screen is out of line. Have to press a couple of cm above icon to select what you want. have reset and used any repair tests / tools avail on the ...
...and then preview the scanner light is on and the scanner makes a sqeeking noise, the light moves a cm. or so then moves back. A window comes up saying scanner is not connected and it could be a
Question about Nikon LS Office Equipment & Supplies
...cropping of the image occurs in both 'Simple Mode' and 'Advanced Mode'. The width (approx 3.49cm) is correctly detected, but the height is often wrong, and if I attempt to make it larger, e.g. ...
... the scanner mechanices attempts to go through the motions but it just loops back after going a few cm's along the rail. I have scanned film once, ever since then the scanner just wont work. If this ...
Question about Konica Minolta Office Equipment & Supplies
...the way out, you will see inside a long strip of LED and next to it on left hand side about a 1-2 cm another strip of MICRO LED Array. This is essentially yor print head and it has to be spotless ...
...para mi impresora Epson 60 Stilus.. pero por detras ,el scanner tiene una entrada circular ,de un cm de diametro ( power input 15 volt 1.o ampere), dentro se ve una espiga que sobresale, pero no ...
...power-units. So I cut the DC cable a few centimeters from the power-unit, split the two leads 4 cm apart and dismantled 1 cm of insulation from each end. On my power-unit one of the leads were ...
Question about BenQ Office Equipment & Supplies
want to download benq multifunction cm 3000 printer on my computor multifuntion cm 3000 Here is the link for BENQ Multifunctional CM 3000 driver.Enter the Captch code, download the driver and install ...
Question about Nikon LS Office Equipment & Supplies
...plastic front, to reveal the motor. Use a screwdriver to move the carriage back and forward by a cm or so, leaving it near the front again, but not tightly - say half a turn away from the
43 questions posted
Usually answered in minutes!
4 Questions
3 Questions
5 Questions
0 Questions
1 Questions