Line 6 Spider Iii 30 "red" Questions

The red wire goes to a black terminal and the black to a red on the horn. Is this wrong and could it be why it is not working The red wire goes to a balck terminal on the horn and the black to a red. ...

on my peavey pro 15 neo speakers i don't know which wire is for what. What is the black, red, blue and yellow wires for? black and red will goto 1 speaker. and blue/yellow to the other. typically ...

I just bought a Deluxe VM .... when I plug it in, the red delay light is on....and everything has delay on it. When I press the little white button on the amp in or out, the red light on the amp still

On my fender blues deluxe, there is a red light which is usually off. I get intermittent loss of sound, and when this happens, the red light comes on. Any ideas what's wrong? Many thanks Brian Hi. If ...

...Magnavox Universal Remote Code Entry PM335 1. Press and hold the Code Search button until the red indicator stays on. Release the Code Search button. 2. Press and release the desired mode

...set of wires go the compression driver and which set went to the woofer. There are a black and red twisted together and a blue and yellow together. Can't remember which set went where nor which ...

...is normal depending on how much gain is dialled in. The JVM has 3 overdrive modes (Green, Orange, Red) if the gain knob is at about 9 o'clock or higher and you are using Orange the amp will have a ...

what is the fuse name/type those are Red Dot Lamps. people most comonly know them as red dot fuses, ( whatever ) it just goes on the crossover to protect your hfd. if it blew you might want to take ...

...a suply. in this device the 48 volt(dc) is used for phantom power . and the o/p volt is from the red cable are 36volt,56volt 56volt and 75volt all in dc. take red as

my red wire from battery became un soldered where dose it go It should be easy to identify because of the solder where it was connected...You should notice at first glance....However the red wire ...