Line 6 Spider Iii 30 "amp power" Questions

...power amp into the 1/4 Amp inserts in the master section, does the external amp parallel with the internal amp or is it routed elsewhere? Any help or thoughts welcomed. Based on my research, the ...

...power amp. can i connect a 10channel samson 900watt power mixer amp to a gli pro xa5500 3500watt amp and use it with various speakers. You have two aux sends on that mixer so quite easy to use one of ...

...Power Amp Inputs. That doesn't make sense to me, since the SX2442FX is not technically a Power Amp. Am I right, or is my friend right? Thanks. Either way will work, however your friend's ...

...power amp in and use the Peavey to power the monitors. I thought that this would be possible on the PMP3000 ie mon send to pwer amp insert, but it doesn't seem to work. Can any one help?? Cheers ...

amp and the power outlet. 2. Check the fuse and replace it if needed. 3. Check the power switch and ensure it is in the correct position. 4. Check the battery (if applicable) and replace it if needed.

...power amp or two 90 watt power amps? If there are stereo effects , like chours and delay it more than likely has 2 90watt amps Welcome to the world of "specsmanship!" I could not find the exact ...

...out on amp fuse is good, no power GDEC 15 turned it on powerlight flashed off fuse is good no power to amp cord is good amp used only 5 hours sir, send me behringer pmp1280s circuits diagram

...power amp for both these outputs is blown, is there an easy fix of am I looking at replacing the power amp board HCA2500, and if so where can I get one? Hi, I think in most amps switching to bridge ...

Amp was only working at 1/2 power then stopped working entirely. I have 2 identical amps and noticed that one didn't seem to have enough power. I was switching the 1/4'' jacks ...

power amp, until the loop is returned from the mixer/external amp? Mine doesn't! And if I was using an effects pedal, do I go from guitar via effects pedal to input 1 or, do I put the effects pedal in