...microphone with a cheap system. It will not go away unless you turn the volume down on the system. If you want to put good money down on a nice SHURE brand microphone it will definitly help with the ...
...microphone level by setting the volume knob, the one on the very bottom, to the 12 o'clock position. Then turn the gain knob, the smaller plastic one on the very top, until the desired volume is ...
goes on the drive channel, and there is a strange crackling on the clean channel. i dont know if its the tubes, the speaker, or electronics. Using a common lead pencil, gently tap on the smaller tubes
...microphone that requires phantom power make sure you turn the power to the mixing board on first, then the phantom power. Do this with the main volume control all the way off. When the mixer has ...
...volume here and there. While amp was on it would just die and to get it back on I'd have to switch the "Standby" switch on and off hard and then I'd get signal back. I brought down to a tech in the ...
Question about Kustom Music
...volume is too low, it may result in no sound or faint sound. Test the mic and instrument input: Try connecting a different microphone or instrument to the speaker to see if the problem is with the ...
166 questions posted
Usually answered in minutes!
25 Questions
18 Questions
12 Questions
