Crate FlexWave FW15 Guitar Amp Combo, 15 Watt Single 8 Speaker "daisy chain speakers" Questions

on output B *daisy chained) and (Monitors hooked to output A *daisy chained) all speakers passive (mains=Peavey 215)+ (monitors=PV 15M) We'll need the make and model of your mixer in order to help you

pmp6000 no sound Speakers hooked up to l main then daisy chained to r speaker no sound No sound at all, or just to the "r" (rear / right?) speaker? Can you be a bit more specific? Will be glad to help

...speakers is for daisy-chaining a second speaker. One has to make sure to NOT go below the minimum impedance allowed by your amplifier. Often this minimum is 4 ohms which allows TWO 8 ohm speakers to ...

...daisy chain all 4 speakers....impedance would be too low. You can run two of your 8ohm speakers per side - that results in a 4ohm load per side for the amp. That would give you amp delivery of 450W ...

...daisy chain inputs to the existing speaker inputs. If the amps do not have linked input jacks, then use TRS type WYE connectors at the inputs. Then use speaker rated cables from the amps to the ...

...daisy chained to the non-powered monitor but no sound whatever i do . Can you help? In a word, NO. The line out is line level audio... it has NO power amp and cannot drive a non-powered speaker. I ...

...Daisy chain 3 active on each of the L and R top connectors. You can download a user manual if you don't have one. http://www.behringer.com/EN/downloads/pdf/PMP1000_P0566_M_EN.pdf ALSO PLEASE read my ...

...daisy chain the ev's from channel a and the peavey's from channel B (all speakers are 8 ohm). Also should speakon cable have 4 connecting wires. I opened one of my speakon connectors (NL4FX) ...

...fry the amplifier or the speaker. You don't mention what the amplifier was. If the speaker were daisy chained to other equipment a ground loop probably formed and blew out the woofer. The horn ...

...daisy chained. Weather of not you can use this speaker as an extension cab depends on a number of things. First, what amp are you planning you use for it? What is the minimum resistance for this amp ...