Digi-Tech Digitech Vocalist Live 4 Harmonizer "tuner power sound" Questions

...power just no sound. I need help please. IF YOUR GUITAR has a built in tuner, make sure the tuner is off as it disables output while tuning... The other thing is to check if you have a volume control ...

...power supply problem, considering, the tuner is the part of the circuit that would need power. Volume and tone controls don't, unless they are active,(which I've never seen a reason for). I would try ...

...tuner on using the power button. Play an open string note close to the tuner (no more than about 1/2 metre away) - for instance the low E on string 6. The built in microphone will pick up the sound ...

Tuner Won't Acknowledge Sound It has power, but will not acknowledge any sounds from my guitar, with or without the cable. Before turning the unit on, press the calib/batt button to check the ...

...power are working lcd light are on.but the sound cannot come out.can any one help me.. What letters / numbers that appears on the screen? If the display is normal, and you can switch to other banks, ...

tuner is there a trick to this as well.. Have you any suggestions that might help me. cheers Sounds like the mic you are using requires "Phantom Power." This means, you will likely have to purchase an

...power is going to the speakers. the on board tuner also does not work. the amp is two years old not used very much maybe 20 times total. is there a fuse internal can't find any thing on the outside. ...

...tuner and an 'integrated amplifier' which has power amps to drive speakers as well as a pre-amp and input selection switching. rjivaro -- Wouldn't there be noticeable degradation of the sound, due to ...

...power amp. The first thing to check is that the amplifier reaches DC balance at the output which is easy to find... Using a pair of headphones, plug into the "send/tuner" and see if you have ...

...tuner works fine but for some reason I cannot hear any effects. Have I somehow bypassed the effects block or is it malfunctioning? What am I doing wrong? I have a serial set up. Thanks. JET Have you ...