does anyone know the factory mixture setting screws for electrolux hedge trimmer Carefully Bottom each screw and turn out 1 to 1 1/2 turns. This should get you started. Adjust low and high speed ...
my tanaka 2100 hedge will only run at top revs it will not idle Hello, Have you tried changing the fuel and the fuel filter?
HEDGE TRIMMER IS EASY TO START AND RUNS GREAT AT HIGH SPEED BUT WILL NOT IDLE. ALSO IS SLUGGISH IN RESPONDING TO THROTTLE. Have replaced diaphraghm assemblies and fuel lines You have two adjustment ...
...hedge trimmer just wont start.it runs for a second and stops Bit late to help the owner of this question and yes it could be a carbie issue but also check the idle speed. If it has dropped out of ...
...hedge trimmer's switched off and idle before attempting to remove any jammed cuttings # Wear protective clothing including heavy-duty footwear and safety goggles to protect your eyes from flying ...
my tanaka chain saw wont idle and when i pull the gas trigger it quits or bogs down clean spark plug and gap, remove air filter and clean, look at the spark plug and tell us what color it is, You may ...
...hedge trimmer runs at high speed,but stalls at low speed. Also will not idle The first thing to do, is to clean the air filter, and remove the plug, and clean with a wire brush, if neccesary. You ...
...hedge trimmer and I had been using the wrong fuel mixture in it (about 1 or 2 tanks of the wrong stuff) and didn't realize that until it wouldn't run properly. So I emptied the tank, put in the 50:1 ...
added throttle and cuts out The trimmer runs decent at idle but when throttle or fuel is added the trimmer cuts out. remove the muffler and run it if runs good open the muffler and clean the ...
Hedge trimmer goes dead Will start and idle, but goes dead when I pull trigger to idle up Most likely a fueling issue but could be something else, more detail on the condition of the machine would be ...
62 questions posted
Usually answered in minutes!
295 Questions
300 Questions
122 Questions
96 Questions