Troy-Bilt Pony Garden Tiller "wheels" Questions

Left wheel does not turn, axle turns but wheel does not turn. I have a Craftsman 5.0HP rear tine tiller and the left tire/wheel does not turn. I see axle turning, but tire/wheel does not turn. The ...

how do u remove the tire off a rear rotiller Remove the pin that secures the wheel to the axle and remove the wheel. Sometimes the wheel will become rusted to the axle and can not be removed. Its best

disengage wheels from transmission How do I disengage the wheel locks from the transmission on troy built tiller (tuffy) when it is not running. The wheel locked make it hard to move around the garage

...bilt won't go in neutral my troy bilt ''junior'' wont go in neutral; in the neutral position, the wheels are locked. The wheels turn when the engine runs, forward & reverse, but I dont want to

...start up and drive it. Some allow to freewheel by pulling the pins on the wheel hubs, pushing the wheels "in" and reinstalling the pin. This allows the hub to "freewheel" on the axle and the pin ...

...should have detailed instructions on how to replace your seals. On the Horse model you remove the wheels and then carefully use a couple of screw drivers to pry out the old seals being careful not ...

troybuilt rototiller axle spins, rear tines spin, but wheels don't move Most of them have a pin to lock the wheel to the axle... Check the center hub of the wheel and see if you can find some kind of ...

...some models to "freewheel" but you have to remove the retaining pin on the wheel hubs and push the wheels inward and then reinstall the pin to keep the wheel from coming off. Hope this

... Please ... what is the make and model of this machine? If your tiller is one that has power to the wheels and the tines at the same time ... are the wheels going? If it is one with no power to the ...

We are trying to remove the wheels and tines from the craftsman roto tiller in order to replace a broken drive chain. We are having a very difficult time getting the wheels and tines off. Any ...